Howdy all. So here is the update. The video switch box is defective. I get no antenna signal to any ports when connected to the "antenna in" jack. It does work when I connect the antenna in to the "Aux in" jack. Still getting too low of a signal for the rear TV to actually play. I know this because that is what the TV actually displays. I did take it up and connect it to the cable going to the front TV and it worked. I'm pretty sure it has to do with the signal being split twice before it runs through 50 or 60 ft. of cable to the rear TV. So to address all of those discrepancies, I ordered the following: Wingman, the Winegard SENSARPRO Signal detector/amp, and a new selector box (not Winegard). There is a replacement selector box (Quest QS53D Video Control Center). I still need to get a tool to check the cables.
