2 to 1 tail light conversion module

Question

I currently have a MME 5 amp Powered tail light conversion module.

It worked fine until I put LED tail lights on the trailer.

Now the left and right turn signals work, the marker lights work, but the emergency flashers do not.

I currently have the conversion box attached to a terminal box that contains all the connections for the trailer plug on the Motor Home.

I need a GOOD quality conversion module that works with LED (low current draw)

I would like the same style, vehicle wires on one side and trailer wires on the other, well labeled and flat

choochooman74 · Answer

I use this from eTrailer. I used it in 2 vehicles that had amber turns. I installed this after installing LEDs in my first vehicle, that totally messed up everything with another converter in place (probably what you're going through). Then, when I got my 2nd vehicle, I put LEDs in it right away, and got this coverter again for the trailer. You can see my review on it, too, on etrailer.com (Matt M).

http://www.etrailer.com/Wiring/Tow-Ready/119190KIT.html

glennlever · Answer

ChooChooMan74 wrote:I use this from eTrailer.  I used it in 2 vehicles that had amber turns.  I installed this after installing LEDs in my first vehicle, that totally messed up everything with another converter in place (probably what you're going through).  Then, when I got my 2nd vehicle, I put LEDs in it right away, and got this coverter again for the trailer.  You can see my review on it, too, on etrailer.com (Matt M).http://www.etrailer.com/Wiring/Tow-Ready/119190KIT.htmlWow, $74.00.I just need the module and would like the wires for the trailer and Motor Home split.Not in this configuration.

choochooman74 · Answer

Unfortunately, they must have changed it since I got mine (Notice in the description, it says "upgraded") Mine looks like this

glennlever · Answer

ChooChooMan74 wrote:Unfortunately, they must have changed it since I got mine (Notice in the description, it says "upgraded") Mine looks like thisThat is more what I am looking for. Manufacturer? Does it state it is good for LED lights?

choochooman74 · Answer

GlennLever wrote:ChooChooMan74 wrote:Unfortunately, they must have changed it since I got mine (Notice in the description, it says "upgraded") Mine looks like thisThat is more what I am looking for. Manufacturer? Does it state it is good for LED lights?That is the old version of the link that I provided above. They changed the design. The old number is tow ready 119190 and the new one is 119191

Forum Discussion

2 to 1 tail light conversion module

About RV Tips & Tricks

Related Content

Electronics module

ABS module bleed suggestions????

Remote control module

brake control module

Cummins Electronic Control Module ???