3000W Chinese Gensets Info.
professor95 wrote: EDIT ADDED 45/5/2013- When this thread started in March of 2005, I never expected to see it survive this long or amass the quantity of information that has been shared here. In...
Forum Discussion
My Nikota genset had the recoil starter quit today. All I had to do to make it work was to take the starter off and tighten the bolt to make it work again. I have also made a platform for the back of the trailer to mount the genset to. I have attached hinged plywood panels to the frame so I can lift them to let in air, attaching ceiling tiles to the plywood to dampen them. I have left 2" on each side of the genset and put dividers in the set to direct air flow. the top is for the most part open for at least 4" for air flow. I used EMT for the exit of fumes to the top of the trailer. To lower vibration I have suspended the genset on springs, that makes a no vibration in the trailer very nice. I was thinking of hanging a couple old tires on the back just to finnish the look.
