3000W Chinese Gensets Info.
professor95 wrote: EDIT ADDED 45/5/2013- When this thread started in March of 2005, I never expected to see it survive this long or amass the quantity of information that has been shared here. In...
Forum Discussion
The monitor panel is the one that controls the inverter/charger etc and shows the DC voltage and the DC current so not sure if that's the same as you have.
One thing I did notice when connected to 50amp shore power was that the standard load shedder EMS - the one that shows gen/50/30/20 was only showing 30amp and not 50. I haven't had a chance to test it again so it may have been the campsite post. The DC Inverter panel worked OK on that power input.
I'll check the output of the genny with a digital meter tomorrow.
One thing I did notice when connected to 50amp shore power was that the standard load shedder EMS - the one that shows gen/50/30/20 was only showing 30amp and not 50. I haven't had a chance to test it again so it may have been the campsite post. The DC Inverter panel worked OK on that power input.
I'll check the output of the genny with a digital meter tomorrow.
