Forum Discussion
MrWizard
Jun 20, 2007Moderator
Wally_Gator wrote:
Mr. Wizzard...
Please explain... Plugged into the normal 3 prong outlet. A/C runs fine, although on a smallish connector for that kind of juice.
Using the 4 prong dogbone to 30 Amp RV connector... I checked with my multimeter
for 120 across the two blade sockets before hooking up my RV. It showed 119 volts on the A/C setting. When I plugged in the RV and turned on the A/C, it would not run. One outlet does and one does not... The 15 amp outlet does work and the 30 does not.....
Can you shed any light on this? Any help is appreciated.
Thank you
Walter
this sounds like a loose or bad connection on the inside of the control panel
either with red/brwn connection or the other pair, a bad connection would mean you can't get power from one of the windings
it could be in the switch.. turn everything off, flip the switch back and forth between the 240/120 mode several times,
then put it back in the 120 mode and try the 30 amp socket again
if that doesn't work you may need to open the panel and check the wiring connections
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,190 PostsLatest Activity: Jan 24, 2025