3000W Chinese Gensets Info.

professor95 wrote:
Forget the idea of using pvc or cpvc on the exhaust of the genset. Use 3/4" id metal and keep it 3 feet or less. If you must go over 3 feet, increase your size to 1" id for an absolute max of 6 feet. For each 90 degree bend in the pipe, take off a foot of legenth in the allowance.

Professor95, thanks for your help (and for starting this humongous thread!). I had started a new thread titled "Homemade generator exhaust system" and have just posted a diagram of my proposed configuration. I would appreciate your critique there very much.

Homemade generator exhaust system link

Thanks,
Skyzoomer