3000W Chinese Gensets Info.
professor95 wrote: EDIT ADDED 45/5/2013- When this thread started in March of 2005, I never expected to see it survive this long or amass the quantity of information that has been shared here. In...
Forum Discussion
LittleBill wrote:tvman44 wrote:
Go to the Champion website and there you will find all the service information you can use on this ginny.
http://www.championpowerequipment.com/tb/CPETB1020001%20Valve%20Adjustment.pdf
HTH.
Wish all manufacturers were this generous with their information.
:)
Different valve clearance in this bulletin
word to the wise, valve clearance numbers are different between the two bulletins. i have a 1st generation rocker assembly elim3000. my generator was sitting at the valve clearances listed in this document. i of course tried to adjust them breaking the stud bolt on the intake valve. hopefully i can get a replacement bolt.
notice they say to run 2 plates for durability i only have 1 plate maybe i will get another
watch the clearances and decide for yourself
What are you referring to by 2 plates??
