3000W Chinese Gensets Info.
professor95 wrote: EDIT ADDED 45/5/2013- When this thread started in March of 2005, I never expected to see it survive this long or amass the quantity of information that has been shared here. In...
Forum Discussion
Thank you both for your responses. Actually the very first time I tried to use the champion to weld was about one month ago and it must have been 80 degrees. I was in a hurry so when I saw the results, I stopped and plugged the welder in the 20A circuit of my garage.
I forgot to mention that yesterday I tried 1/16" as well as 3/32" rods with about the same result. My unit is a Harbor Freight welder Arc 140(??) rated to 70A on 120V and 110A on 240V. Maximum draw 42A. I used it to modify my hitch so I could have a carrier as well as be able to tow if I have to. It came out pretty good considering it was my first welding project.
Most important, my champion runs the A/C on my MH just fine.
Thanks again and keep cool MrWizard... it will be another hot one today!
I forgot to mention that yesterday I tried 1/16" as well as 3/32" rods with about the same result. My unit is a Harbor Freight welder Arc 140(??) rated to 70A on 120V and 110A on 240V. Maximum draw 42A. I used it to modify my hitch so I could have a carrier as well as be able to tow if I have to. It came out pretty good considering it was my first welding project.
Most important, my champion runs the A/C on my MH just fine.
Thanks again and keep cool MrWizard... it will be another hot one today!
