3000W Chinese Gensets Info.
professor95 wrote: EDIT ADDED 45/5/2013- When this thread started in March of 2005, I never expected to see it survive this long or amass the quantity of information that has been shared here. In...
Forum Discussion
Good stuff!
I took the carb apart and cleaned it really well. There was hardly any gunk in the bowel and on the jet. Put it all back together and same thing. So I pulled off the rod that controls the throttle and was able to get it to run just fine controlling the speed myself. Hooked the rod back up and it pluses. Almost like a 2 cylinder motor that is missing one cylinder
Guess Ill call champ again and see about getting looked at by the warranty place.
I took the carb apart and cleaned it really well. There was hardly any gunk in the bowel and on the jet. Put it all back together and same thing. So I pulled off the rod that controls the throttle and was able to get it to run just fine controlling the speed myself. Hooked the rod back up and it pluses. Almost like a 2 cylinder motor that is missing one cylinder
Guess Ill call champ again and see about getting looked at by the warranty place.
