3000W Chinese Gensets Info.
professor95 wrote: EDIT ADDED 45/5/2013- When this thread started in March of 2005, I never expected to see it survive this long or amass the quantity of information that has been shared here. In...
Forum Discussion
MrWizard wrote:
The pulsing problem can be caused by a broken throttle tension spring on the throttle its real long but real fine & real weak
Look to see if its missing
There should be 2 springs they fasten at different points
1 shorter stronger one, and the really fine throttle tension spring
I have had that one come off on one end and my gen ran like******couldnt take any load whatsoever.It all started when i got some sand inside the carb and the throttle butterfly got stuck.Ever since i use grease around the filter as well as filter oil on the filter never a problem again.
