Forum Discussion
gasser9
Mar 18, 2010Explorer
According to NFPA phamphlet 58 (the lpg rule book used by all 50 states) you must install a positive fuel valve ahead of the KN when you do this you can adjust the kn so that a spit or soap bubble on the outlet will break in 3-5 seconds this will eliminate the need for the primer. you can also rece the spark plug gap by 10%-15% wich will aid in starting, reduce valve & head temperature, & possibly fuel consumption.
DO NOT WSE ANY PLASTIC TUBEING IN A LPG SYSTEM IT WILL DETERIOATE FROM THE LP, THE HEAT IN THE ENGINE AREA WILL ALSO WEAKEN IT!!!!!
DO NOT WSE ANY PLASTIC TUBEING IN A LPG SYSTEM IT WILL DETERIOATE FROM THE LP, THE HEAT IN THE ENGINE AREA WILL ALSO WEAKEN IT!!!!!
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,211 PostsLatest Activity: Mar 08, 2025