Alternator amps?

tarnold wrote:
1997 E350 6.8 . How can I tell what is the rated amps for this alternator? There are no visible tags or markings. A place I read says all 6.8 have 130 amp, another says could be 110 or 130. Nothing in my Ford book says.

Why not ask the people who designed and built your vehicle directly?

To do that, go to www.oemford.parts This is a Ford factory parts site. Input your vehicle information, then go thru the catalogue and look it up. Not only will you get a drawing of the available alternator(s), an exploded drawing of the alternator(s), the factory part number, the amp rating and a bunch of other useful information. You may even choose to buy the alternator they sell (the OEM unit) but you don't have to.

Chum lee (formerly worked in a Ford OEM Parts Department)

The markings are not normally on the housing as the housing maybe for more then one amp rating. I found it marked on the field which varies based on amperage.

The amp rating is stamped somewhere on the housing, often on the mounting tab but it is stamped on there. also a photo of the anternator may be of use to some folks (Alas not me) as the larger alternator is often,,, Larger, have a ruler in the photo as well.

Finally difference between 110 and 130 is basically, not worth mentioning, (less than 20%) that is tolerance on many electronic components.

Option two. "Alternators R US" (ok not a real store)

Many cities have "Starter and alternator" shops.. I used to shop one on Grand River in Redford. MI (Detroit suburb) and their trechnicians can likely take a look at it for you and advise.

I had a car that ate starter Drive gears like they were candy.. I got so I could re-build that blasted starter in under 15 minutes on the side of the road or in a parking lot.. ((only 4 bolts) They taught me how. They also re-did the alternator on one vehicle I had a few times. that blasted ride liked to pop diodes.

Richard
thank you

Note: White case regulators are for use with digital dashboards.

MrWizard wrote:
my 97 ford 460 alternator
looks like the large case picture
can not see the front
it has (2) dark? and (1) wht wires, on a blue connector
plugged into what i think is the VR on the back of the case, the VR says motorcraft and is looks to be black, i can't make out any numbers

It's a 130. All F53 460 chassis came with 130 amp alt.Or the previous owner could have installed the wrong alt.

Richard

my 97 ford 460 alternator
looks like the large case picture
can not see the front
it has (2) dark? and (1) wht wires, on a blue connector
plugged into what i think is the VR on the back of the case, the VR says motorcraft and is looks to be black, i can't make out any numbers

OP you have the 130 amp large case

BFL: You cannot see it from the outside but the stator insulation color of the highest amp (75) is yellow. Unless it has been changed and a "remanufactured" alternator has found it's way there, of course.

OP can you use an extendo-mirror and a flashlight and peer behind the case. Is the voltage regulator plastic case black, gray, or white?

I can hardly see the alternator in my MH, never mind count holes or what colour the wires in it are. I can just make out it is a 2G from what is visible. I guess you need to practically remove the engine to change the alternator, no idea. :(

Op here. 2 holes in the "Y". Reddish hue on the windings. So 130?.