Bad Caliper or something elce?
Been having some trouble with a break sticking when hot. Seams to be the left rear. I've replaced the pads, brake hose (on that wheel), greased guide pins and of course, bleed the system. After the ...
Forum Discussion
Funny you should mention that. For me I was thinking backing up and hitting them are what caused it. The ride to somewhere was fine. It's after I get to the destination and backing up to park it was triggered it. And would drag on the way home.
I'm just gonna have to get them to do it then quickly jack a wheel off the ground, (confirm its stuck) then crack the bleeder valve. If fluid spews out under pressure it will at least tell me it's a master cylinder or line problem.
If no fluid comes out under pressed then it hast to be the caliper.
I'm just gonna have to get them to do it then quickly jack a wheel off the ground, (confirm its stuck) then crack the bleeder valve. If fluid spews out under pressure it will at least tell me it's a master cylinder or line problem.
If no fluid comes out under pressed then it hast to be the caliper.
