my magnum energy board display has gone blank. all the components are working, i.e. the inverter, the charger , etc. it just does not display what is going on. any help appreciated
2020 Integra 36U can am spyder or can am commander BE PREPARED- NEVER BRING A KNIFE TO A GUNFIGHT.
If it is just the display on the remote, unplug the remote from either the remote or at the inverter. Wait a minute and plug back in probably will fix the issue. The plug is a standard phone jack and usually easiest to access at the inverter in the bay. The remote cable will have a blue tag marked remote plugged into the blue labeled port.
There is a reset procedure that is directly based on your problem. Do a search on their website and if not there, call them Mon and they will give it to you.
Bob & Betsy - USN Aviation Ret'd '78 & LEO Ret'd '03 & "Oath Keeper Forever"
2005 HR Endeavor 40PRQ, '11 Silverado LT, Ex Cab 6.2L NHT 4x4, w/2017 Rzr 4-900 riding in 16+' enclosed trailer in back. Where the wheels are stopped today