monitor panel black tank display
I know most don't care if there monitor panel readings work or note. My monitor panel appears to work just fine for the two gray water tanks, fresh water tank, water heater and water pump. The only i...
Forum Discussion
The probes are positive to battery.
"The 3 probes on the left are placed so that they sense the different water levels. Electrical current flows between the metal tips of probes connected to a PLUS (+) of a battery and the one on the right, which is connected to the MINUS (-) through the liquid. This current lights up the LEDs."
More info here- scroll all the way through for full explanations:
http://www.rvprobes.com/howitworks.html
I can't tell from the OP and this linked info if the new protected probes will read right if the tank has not been fully cleaned out. I would try to clean it out. Even a garden hose with nozzle set to a good spray shoved down the toilet would help.
"The 3 probes on the left are placed so that they sense the different water levels. Electrical current flows between the metal tips of probes connected to a PLUS (+) of a battery and the one on the right, which is connected to the MINUS (-) through the liquid. This current lights up the LEDs."
More info here- scroll all the way through for full explanations:
http://www.rvprobes.com/howitworks.html
I can't tell from the OP and this linked info if the new protected probes will read right if the tank has not been fully cleaned out. I would try to clean it out. Even a garden hose with nozzle set to a good spray shoved down the toilet would help.
