Sticky hydraulic levelers
The levelers on my class A work well except when it time to pack up and leave. Often 1 or 2 will stay down. I now carry a 6 foot 2x4 and a wood block to push them back into the stored (up) position. E...
Forum Discussion
dougrainer wrote:lryrob9301 wrote:
You need to spray the shafts with WD40 and then run the levelers up and down a couple of times. HWH now recommends this cleaning any time one of their levelers becomes sluggish. Also on a 11 year old system I would say the springs are getting weak and need replacing if that hasn't already been done.
Not true The ONLY thing HWH recommends is to keep the shiny cylinders clean. The cylinders are immersed in Trans oil when retracted. Doug
I would think it is a lubrication problem. The shafts are always lubricated from the inside, but never from the outside. So thinking it is a dry seal problem, thats why I would use oil on the shafts to lube the seal. WD would do nothing for long term lube.
