suburban water heater
I have a ten gallon water heater and the wire that controls the gas needs to be wiggled if I want the gas to come on. the wire connector is behind the black reset cover on the face of the heater.I am ...
Forum Discussion
If there is a crimped on connector on the end of the wire there may be a bad crimp, maybe crimped on the insulation too much and barely making contact with the wire. Also possible the wire has a break inside the insulation some where
An electrical contact cleaner may help. Just had a problem with my ZTR not starting. Pulled some connectors, sprayed with elec cleaner, solved the problem.
An electrical contact cleaner may help. Just had a problem with my ZTR not starting. Pulled some connectors, sprayed with elec cleaner, solved the problem.
