Tips on Troubleshooting Transfer Switch
Hey, I have an '06 Winnie with a Parallax 5070 transfer switch. I have good 120v on shore power, but nothing on generator. I do have 120v on the generator leads at the transfer switch, so I know ...
Forum Discussion
Thanks to all for your advice and suggestions. When I got the switch apart, one of the relay arms was out of alignment with the contact. It was just a matter of putting the arm back in the proper spot and then getting the whole assembly back together. No idea what could have caused it to move about 45 degrees, but at least I know where to look if the problem comes back.
Again, that's to all.
Again, that's to all.
