Two small repairs - seeking advice.
I had two issues emerge on our recent trip. First - it appears that my tire rubbed against the floor of the camper above it (I just noticed now, but it is not a current issue, so I'm guessing it ac...
Forum Discussion
I had a similar problem with the wheel well and I got some 1/8 in aluminum sheet from Home depot/Lowes and epoxied it into the wheel well. It is thin enough that you can press it into the right shape. It may need a couple of sheet metal screws until the adhesive sets. JB weld would work too. Really clean the surface before doing this.
You can buy that molding insert at your local RV store's parts dept. Bring in a short section to get the right size.
You can buy that molding insert at your local RV store's parts dept. Bring in a short section to get the right size.
