Atwood Power Jack/Robofoot install

Install was super easy except the robofoot wont work, think my trailer is a tad to low for it to extend, doesnt straighten out before it hits the ground. If ya wanna buy it let me know lol. make ya a good price.

yep figured it was pretty basic but just wanted to check.

Thanks

Mine was straight forward.

block trailer up so weight is off jack
remove old jack
install new jack (may need to enlarge hole if new jack is larger diameter than old)
run wire to positive battery connection
zip tie loose wires
test jack
remove blocking so jack is supporting trailer

Don't know about the Robofoot but for the jack, just bolt it down and hook up the fused wire to the plus side of the battery. Make sure you scrape the paint off around one the bolt holes so the mounting bolt can make a good ground. The jack is grounded through its mounting bolts.
Barney