Atwood Levelegs

It could be a few things; first thing I'd look for would be a chipped gear.

They're pretty easy to work on. If it's a gear shoot me a PM, I may have a spare kicking around.

I have a spare jack, a parts jack, and a few extra parts too.

call Atwood at 1866-869-3118 and they can walk you through,

Same thing happened to me only mine was when trying to retract. I just kept playing with them, recycling them, even shutting engine off and trying from the beginning. Mine finally retracted and did not (not yet anyway) do it again, Once when one jack did come up but the alarm would not shut off, the dealer who was only a couple of miles away told me to verify the jack was indeed up and then told me which fuse to pull to silence the alarm. Suggest you could do the same. If it is really up, find the fuse to cut off the alarm. The early case required the jack to be rrplaced. The recent case has not happened sgain, but Atwood customer service and my favorite RV tech tells me it is only a meter of time until it must be replsced

I bought this RV new in 05. With all the trouble with the jacks I never had the alarm go off? I don't think I have a alarm?

To get home I have unplugged the harness so I don't have to hear the alarm for miles. I had to get a new jack motor on 2 different jacks, 2 different times. It is really a bad design as you will see when you open one up, the gear goes because it is too small, just not beefy enough.

I don't think I have a alarm

May be a gear issue (sound). If it won't go up you can always try to retract them and gently apply pressure with a auto jack to push it up... It can help in a pinch.

I got the jacks up I just can't get it out of error mode.

That vintage of jack works on amp draw. To reset the alarm you should be able to pull the fuse, leave it out for a minute or 2, then reinstall, which should do a reboot of the system.

Where is the fuse? Under the hood or inside?