furrion 50 amp cover
the 50 amp cover for the power plug has broke off can the cover be replaced
Forum Discussion
- sounds easy enough thanks I think I'll try it
cleojayco wrote:
Is it that tough to re wire a new plug? or take it in for replacement? thanks for the input
Usually 4 screws and caulk/butyl tape. Pull out and take the 4 wires off. Put the 4 wires the same way on the new receptacle and reinstall.
Should be just as easy as it sounds.cleojayco wrote:
Is it that tough to re wire a new plug? or take it in for replacement? thanks for the input
If this simple task is difficult for you, RVing will sure be a chore.- Is it that tough to re wire a new plug? or take it in for replacement? thanks for the input
- Where did it break ? By just looking at the pictures if the hinge pin broke maybe you could drill all the way through it and use a small bolt as a new hinge pin.
deltabravo wrote:
cleojayco wrote:
does anyone know how difficult it is to replace the plug
It's probably held in with screws.
SAME HEREdeltabravo wrote:
cleojayco wrote:
does anyone know how difficult it is to replace the plug
It's probably held in with screws.
This one, the screws are visible behind the cover.cleojayco wrote:
does anyone know how difficult it is to replace the plug
It's probably held in with screws.- does anyone know how difficult it is to replace the plug
- Probably not. You'll have to buy the entire plug from Furrion.
