How am I going to re-attach this jack?
After ripping the front corner jack off the camper...is there a repair kit for this? Thanks
Forum Discussion
This does not look good. Everything can be rebuilt, but first you need to start disassembly, then you can assess the damage. It is frequently a lot more work than anticipated.
For a general overview, go to the Truck Camper University at the top of the TC section
https://forums.trailerlife.com/index.cfm/fuseaction/thread/tid/25966285.cfm
(or rv.net, or whatever flavor of the Open Roads Forum you use)
Scroll down to "Camper Structural Repairs". There you will find a lot of good reading material.
If the only damaged part of your Atwood jack itself is the cover, you may find a 3d-printed replacement. The jacks have been discontinued and parts are hard to come by.
For a general overview, go to the Truck Camper University at the top of the TC section
https://forums.trailerlife.com/index.cfm/fuseaction/thread/tid/25966285.cfm
(or rv.net, or whatever flavor of the Open Roads Forum you use)
Scroll down to "Camper Structural Repairs". There you will find a lot of good reading material.
If the only damaged part of your Atwood jack itself is the cover, you may find a 3d-printed replacement. The jacks have been discontinued and parts are hard to come by.
