Slide problem

OK Joe A problem is a problem is a problem. Hope as soon as it warms up a bit I can rectify the problem.

These slides are very popular and we looked at TCs for a long time and then when we saw the slide we were sold.... to each his own!

You are right, Harley. Absolutely right.

I have no use for slides, but I was out of line.

I'm sorry.

Joe

I don't have any advice for your problem but when you find out what it is please let us know.

John

Thanks to all I will check all these ideas out as soon as the snow melts ... we are in for it again tonight....hehehe

Dave
Bring your slide all the way in and than inspect the top (roof part) of it. I had my AF for about a year and than one day I happened to inspect the top and I found one of those recessed ceiling light lenses laying up there. It was apparently left up there by one of the employees. Im sure over time if that would of placed itself in the right position, it could of caused a problem. If a foreign object is up there, you wont know it till to find it.

Well, Joe I certainly want to thank you for your input when someone has a problem they certainly want a guy like you around!

Thanks again ......

mine does the same thing on the top front, subscribed...

Check your roller bearings in the slide tracks. I had one come apart and misaligned the slide. I was able to repair it myself.

I would open the slide and see if something may have gotten caught in the slide. I've had that happen to me before and I even have a topper on the slide. In my case, part of a broken branch got caught in it.

Additions info that I neglected... the slide sticks out that 1 1/2 inches onle on the top rear corner... bottom is flush