Small step for camper
We have a scissor step to access the camper that attaches to the threshold (?) or back platform of the camper. There is an attached lip that the edge of the step fits into. We have added cotter pins t...
Forum Discussion
clikrf8 wrote:
AnEv942:
Thanks for the research. I should have posted photos but am too lazy to learn how. I believe we can use that step you showed in last image underneath the porch or platform or whatever it is called to the left of left opening door. Where can I buy such a step? I found an image of one on a new Lance on their page but couldn’t find a mention or listing of it there. Does it fold up so it won’t bottom out? We go off road a lot (road to Delamar, NV ghost town, Jumbled Rock Gulch in Nevada, etc.). Hubby can weld so he can put a bracket underneath and bolt it.
Thanks to everyone else who posted.
I think using one that attaches to the lip in the center would block out the license plate so need to go with the left side. I think using one that attaches to the lip in the center would block out the license plate so need to go with the left side. Hitch is out for same reason. We could move plate, I guess.
I had the same issue. The TL Stow & Go steps blocked the license plate (on the truck step bumper from plain view behind which is probably an infraction driving down the road, so I just moved the plate from the truck to the camper itself, mounting it on the left side with a Grote illuminated license plate bracket. Issue solved.
I just have to remember to take the plate off the truck and put it on the camper.
