calfman47
Explorer
Joined 23 years ago
User Profile
User Widgets
All Activity
Re: Allison 1000 02 workhorse w22
This has all been good information and I’m very thankful For your reply’s. I did talk with a Allison service guy that has the proper Scanner for the transmission. He said you can maybe find the problem by changing some parts But it could be that it’s not anything but a tweet or program change Upgrade ECT. $150 to scan it and $150 pur hour for labour. It may be in my best interest to limp in to his shop and give him a shot at it I’ll try to let you know how it turned out.417Views0likes0Comments- 416Views0likes0Comments
Allison 1000 02 workhorse w22
02 workhorse 90 k transmission toque converter is locking and unlocking When pulling a steep grade in 3ed gear. I’ve never had an issue with it and all my maintance is up to date. Does anyone know of a controll mod or fix for the issue. I do get a check engine light when it happens and then it clears Itself after a while or after restart. Also it doesn’t happen every time I pull a grade.1.7KViews0likes9Commentsclass a slidout
My slide out is out of square, its tight at the top and wide at the bottom the same for the other side but wide at the bottom and tight at the top. It has some level adjustments that I have tried but with no success. anyone had issues like this? My slide is the kind that raises up a couple inches on rollers before it comes inside.575Views0likes1CommentTow dolly wheel bearings
I bought a used Master tow dolly and modafied it to carry a motorcycle and a car. I pulled the break hubs to check the wheel bearings and found that they were pumped full of greese. My question is if the bearing is properly packed why all the extra greese. When the balls or rollers are moving all the extra greese is expeld from the bearing cavity after a very then film stays behind to lubrcate the bearing. I would think a packed wheel bearing would be good for thousands of miles under normal use. I would like to here other peoples input on this.3.6KViews0likes5CommentsMy headlights went out lowbeams and highbeams.
Both high and low beams just went out all my other lights work fine. I cut the wires to the low high bulbs and added a switch and fuse and they are working now while i have them on seperet circits. I have no power to the two origenal light power wires. Someone told me it was the headlight relay which I cant find, I think I coud fix it if i could find it. If anyone can help it would very much apprecated. 2002 damon intruder 8.1 workhorse chassis.1.3KViews0likes5Comments
Groups
Motorhome Group
Join in here to discuss all things motorhomes.Jan 21, 202538,705 Posts
