Changing coolant in V-10
I have a 2004 Jayco MH with the Ford V-10 engine. Since I bought it used from a dealer 2 years ago I have no service records. Although there is less than 20K miles on the engine it is still a 10 ye...
Forum Discussion
pauldub wrote:
If you just want to get the old coolant out, you can fill it up with water once or twice and probably get 99.99% of the old coolant out. You can even do this with distilled water at less than a buck a gallon from Walmart. After the last drain, look up the coolant capacity and add that amount of straight coolant then fill the remainder with (distilled) water.
+1 This is how I do it. Rinse with $25 of distilled water, drain, fill 50% capacity spec with new coolant, top off with distilled.
