Dish vip211k receiver
would like to verify with current rv user if you can connect hdmi to tv 1 and coax to tv 2, and watch same channel at same time. I have received conflicting information. Some say you can only watch o...
Forum Discussion
bennefim wrote:
Bill, didn't know a channel search was required. Will try that tomorrow. Didn't see a channel 3/4 setting on the box but will try that also. If the receiver and tv were on wrong channels, wouldn't
I have no reception at all?
Doug
The output channel of the receiver is set in the software (setup menu) so there is no external switch. Let us know after you do a new search. You should come up with the 1 necessary analog channel. It's possible to get a snowy picture from a nearby channel (especially 3/4) when doing this kind of setup.
