Burner tube assy. older Norcold Frig
Next project; disassemble and clean the burner tube on my Norcold Frig. It looks like two nuts and it should slide out.Is there some adjustment required to align the igniter and tube beyond comon sens...
Forum Discussion
When I replaced my old rusted out burner with the new style flare fitting I used the existing Al gas line and just flared the end. You can see from the above picture the "S" tube has plenty of length to it. I used a tube cutter and flare die both of which I had already. Chris Bryant's advise was very helpful on this project.
