Can I replace the LP Rubber hose myself?
I found that my rubber LP gas hose was crimped and causing problems with water heater, furnace and stove. When I finally tracked down the problem and straightened the hose all was working just fine. ...
Forum Discussion
I got sick and tired of dealing with rubber-band quality LPG hoses running from tank regulator to pipe inlet. So I had an LPG liquid motor fuel hose made up with crimp fittings. Not very flexible but with 90 degree and 45 degree fittings, it was a snap to install. Also canned the single stage regulator. 11-years later, not the faintest trace of a bubble. A manometer check last year 11" of water column pressure right to the tenth.
