Connecting radio to Winegard batwing antenna
I am replacing the Jensen Omni antenna that blew off last summer with a Winegard Sensar IV. With the old antenna setup the Jensen radio antenna lead was connected to a port on the back of the Jensen a...
Forum Discussion
I ran into this same problem. I replaced the Omni directional ant. on the roof with a Jack ant. The Omni's power supply (wall plate) had a connection for the radio but the Jack ant. power supply did not.
I called Jack and they told me as long as the power supply is putting out 12V to the ant. itself, the existing Omni's P.S. would be fine.
So that's what I did; I used the old antenna's power supply for the new antenna with the radio connected to it.
It works flawlessly.
I called Jack and they told me as long as the power supply is putting out 12V to the ant. itself, the existing Omni's P.S. would be fine.
So that's what I did; I used the old antenna's power supply for the new antenna with the radio connected to it.
It works flawlessly.
