prodigy P2 brake controller acting funny
Hello All, Installed my Prodigy P2 in my 2005 GMC 2500HD 4x4 ext cab today. Hooked up my brand new car hauler and tried it out. Here's what I found: Set up the Prodigy like it said... 6.0 volts...
Forum Discussion
Thanks Partsman!
I did some checking and yes, my wiring harness was not the right one. I think I must have taken this harness from my 2000 Chevy pickup when I traded it in and got this 2005 GMC, which would explain everything.
I moved the red wire to an different pin location (after looking up several pictures of Tekonsha wiring harnesses online), and now I get voltage readings when braking with the lights on or off. Turning the lights on and off makes no change to the brake controller display.
Thanks for the help people!
s10texan
I did some checking and yes, my wiring harness was not the right one. I think I must have taken this harness from my 2000 Chevy pickup when I traded it in and got this 2005 GMC, which would explain everything.
I moved the red wire to an different pin location (after looking up several pictures of Tekonsha wiring harnesses online), and now I get voltage readings when braking with the lights on or off. Turning the lights on and off makes no change to the brake controller display.
Thanks for the help people!
s10texan
