Stabilizer blocks alternatives
Hello folks, We have scissor stabilizers on our TT. Usually we put a number of blocks under each stabilizer (probably up to 10-15”). I am looking to save weight (and space) of all the blocks we ar...
Forum Discussion
I've been using these plastic stands that I got off of Amazon. They stack on each other for storage, not as heavy as wood and they reduce the length that the jacks have to extend because of my taller trailer.
I still put a piece of wood under the jack and the 'block' as it seems to spread the load better.
I also added the Strong Arm bars and that's the single most best thing to removing pretty much all the 'bounce' out the trailer when walking inside.
I have 4 on the rear and 2 up front. Here is the front setup.
Works for me. :)
Good luck! Mitch
I still put a piece of wood under the jack and the 'block' as it seems to spread the load better.
I also added the Strong Arm bars and that's the single most best thing to removing pretty much all the 'bounce' out the trailer when walking inside.
I have 4 on the rear and 2 up front. Here is the front setup.
Works for me. :)
Good luck! Mitch
