Step to reach hitch pin

I cut a piece of pvc maybe 1.5 ft long that slides over the hitch handle

There is a folding step that you can hang on the tire, here is one of many



https://www.northerntool.com/images/product/2000x2000/449/44946_2000x2000.jpg

Had the same issue reaching my B&W handle and pin. I'm 5'7" and 75 so trying to put my foot on top of the tire was not a good solution. I found a tire step on Amazon and it works perfectly plus it folds up and I lay it in the floor behind the driver seat in the truck. Check it out

https://www.amazon.com/s?k=tire+step&crid=1ACA51XEMAIFH&sprefix=tire+ste%2Caps%2C126&ref=nb_sb_ss_ts-doa-p_2_8

austinjenna wrote:
I cut a piece of pvc maybe 1.5 ft long that slides over the hitch handle

How do you put the locking pin in????

I use a 2 step folding plastic ladder. I stand it beside the rear wheel and reach over to the handle to lock it in place or unlock it. When travelling I put it on the floor in the back seat. When not travelling it goes into the bed of the truck. I also use it when fueling up. I have a 50 gallon aux fuel tank right behind the cab of the truck. I'm 230 lbs and it support this old body.

Pipeman wrote:
I use a 2 step folding plastic ladder. I stand it beside the rear wheel and reach over to the handle to lock it in place or unlock it. When travelling I put it on the floor in the back seat. When not travelling it goes into the bed of the truck.

I think mine is a three step, but it's the same idea. I also find many uses for it around the campsite as well as on the road. I'm only 195 pounds, but I am 89 years old so that counts for something.

I had the same prob and asked the fine folks here the exact same thing. Solution: A foldable metal step that goes over the rear tire that simply folds up and gets placed inside the box leaning up against the outside wall. Works great. BUT (isn't there a always one of these?), 2 things to watch for. 1. cotter pins may fall out. 2. Careful not to hit side of box (outside/painted) when taking in/out. Has many adjustments and once it's set, don't have to fuss w/ it again. Forgot where I purchased it from, but want to say Amazon???

Likes to tow wrote:
Had the same issue reaching my B&W handle and pin. I'm 5'7" and 75 so trying to put my foot on top of the tire was not a good solution. I found a tire step on Amazon and it works perfectly plus it folds up and I lay it in the floor behind the driver seat in the truck. Check it out

https://www.amazon.com/s?k=tire+step&crid=1ACA51XEMAIFH&sprefix=tire+ste%2Caps%2C126&ref=nb_sb_ss_ts-doa-p_2_8

Link


I gave your steps a link. My issue is the hips on our DRW make it a bit of a reach, this works great. Unlike folding stool/steps, it won't kick out when you lean in.

I use a folding plastic step LIKE THIS. They come in a number of different brands and costs.

rhagfo wrote:

Likes to tow wrote:
Had the same issue reaching my B&W handle and pin. I'm 5'7" and 75 so trying to put my foot on top of the tire was not a good solution. I found a tire step on Amazon and it works perfectly plus it folds up and I lay it in the floor behind the driver seat in the truck. Check it out

https://www.amazon.com/s?k=tire+step&crid=1ACA51XEMAIFH&sprefix=tire+ste%2Caps%2C126&ref=nb_sb_ss_ts-doa-p_2_8

Link


My issue is the hips on our DRW make it a bit of a reach,

^This is a case of TOO much truck! A SRW would be more than sufficient for your trailer, problem solved! :B

Just had to, no offense,

Jerry