Air dryer cycling too often ?
I noticed my Air dryer for my compressor was cycling often on our last trip. When I drained the air off both holding tanks before and during the trip I did not notice any moisture. When I say Often th...
Forum Discussion
Depending on the Air Dryer, the purge valve can be serviced with a kit of parts (about $35) and a few minutes under the rig.
It is basically a new valve, three bolts, with O Rings for a Bendix AD-9.
The 150 PSI seems high. Mine is barely to 120psi. Most are at 125PSI. Perhaps there is a gauge problem.
It is basically a new valve, three bolts, with O Rings for a Bendix AD-9.
The 150 PSI seems high. Mine is barely to 120psi. Most are at 125PSI. Perhaps there is a gauge problem.
