Non-Venturi Generator Exhaust Extender Ideas
Folks, I will be heading out on a trip to spring training in Florida here in several weeks. I will be using my genset, and want to be able to safely use it overnight if necessary. I have a fe...
Forum Discussion
I would make an exhaust out of alum gutter down spout similar to the one below. You would have to have a piece as long as your slideout before the elbow and then aprox 7' going up which will be enough to get the exhaust safely away. For those that doubt 7' going up is enough, I often just use this elbow to get the hot air going up and something about hot air rising takes care of the rest.
Most of the weight is supported by the suction cup and metal arm. Total cost less than $25 for alum gutter down spout, elbow, and suction cup.
Most of the weight is supported by the suction cup and metal arm. Total cost less than $25 for alum gutter down spout, elbow, and suction cup.
