Power Control Monitor Panel Not Working

Question

In my 2014 Bounder 34b I have no reading/display at all on my Power Control System Central Monitor Panel.  The good news is all the systems are working whether on generator or shore power.  I really don't use this panel except to see that generator is on while driving when I look up at it. Not sure what else its used for.  Anyways, I checked the J1 Cable on the back of the panel and where it connects to the back of the circuit board and all is good. I also checked small fuses to see if any had blown. Any thoughts? Could the panel go bad?

dougrainer · Answer

1. The NICE thing about PCS control systems is, when it malfunctions it still sends 120 power to all your appliances
2. Also, turn OFF and ON every 120 breaker in that fuse box panel. One of those breakers also supplies 120 power to that board, but will not keep the display from functioning. Doug

PS, do you have the manual for that PCS system?

http://www.precisioncircuitsinc.com/wp-content/uploads/2014/08/PCSOwnersManual.pdf

wa8yxm · Answer

It may be as simple as that pseudo Greek Group IPF (I Popped a Fuse)

There are fuses on the board or so I'm told.. May have popped one.
Or lost a power connection (it runs on battery power not 120vac)
Or something more expensive.

Forum Discussion

Power Control Monitor Panel Not Working

About Motorhome Group

Related Content

Cruise Control - Not working Ford F53

cruse control stop working

Temperature Monitor

Tire pressure monitor

tire monitoring system