Jan-19-2017 01:54 AM
Jan-20-2017 06:27 AM
Mile High wrote:
Don't know if you have the residential type refrigerator or gas absorption/electric, but I have heard on the gas absorption type if the outside of the fridge gets too cold through the outside access vents, it will stop cooling because it thinks everything is already cool. The fix was to put some form of heat back there such as a light bulb.
Jan-19-2017 09:46 AM
Matt_Colie wrote:I never think of it on a compressor unit because they are typically not open to environment on the back like absorption units, unless it was a retrofit.
Dtrink,
There is usually no issue, but any system can "siphon". This can happen to absorption unit more easily than compressor units, but both can have it happen.
Matt
Jan-19-2017 09:44 AM
Old-Biscuit wrote:X2
Do NOT block the 'vents'.....need air flow to properly cool
Jan-19-2017 09:00 AM
Jan-19-2017 07:45 AM
Jan-19-2017 07:13 AM
Jan-19-2017 04:46 AM
Jan-19-2017 04:05 AM
Jan-19-2017 03:53 AM