Clearance lights not working

[Jeepboy71]

Hi all,
I have a 1986 Cascade TC. Trying to figure out the wiring on this guy. Pretty sure I have everything figured out except the lack if clearance lights working. I have zero power to any of them. Camper only has a flat 4 plug on it. I've founded and run power to each lug. The brown wire, which is clearance lights on my truck, is 12v power in the camper. No luck on any of the other lugs. Any ideas would be greatly appreciated.

[Jeepboy71]

Thanks Mitch! Definitely need to figure out where that is.

[MitchF150]

Check your ground wire on the camper.. I have always found with 12v lights not working, it's usually the ground..

Good luck!

Mitch

[Jeepboy71]

Thanks for the tip! I've been looking and have not been able to find any of the light wiring inside the camper. I hate to start cutting holes to access.

[Son_of_Norway]

I have a line tracker/signal tracer that is really helpful for those kind of things. The one I have is made by Sperry but there are a lot of other brands and models of them.