Honda eu2000i 12v outlet for fan?
Hey folks, I have built a enclosure for my Honda gen sets. has anyone used the Honda eu2000i 12v outlet for fan? I had a power wart supplying power to my 2 pc fans 200cfm each . But after lo...
Forum Discussion
SoundGuy wrote:
To the OP ...
There's no need to go through all this when you can use a 120 vac fan and plug it into one of the gensets receptacles, just as I did.
Since the EU2000i's output has a floating neutral I used that same plug to G-N bond the genset's output so my Progressive EMS wouldn't interpret the signal as an open ground and not pass power on to the trailer. 2 birds with 1 stone. ;)
True,, however , Reason I am is I have a 12v power in the bed of my truck that will switch over and run the fans when gen has turned off and allow them to cool for 20 mins before it shuts off. keeping the box and gens cool.
