All ActivityMost RecentMost LikesSolutionsFord Engine sizeI have a ford engine in my 2014 Newmar Bay Star. What size is it? No books came with it. Any way to determine if the oil in the engine is synthetic?roadside service providersWho are you folks using for roadside service. I have a class A. Thanks for any response hopefully include annual price and experiences.Dometic ACRecently acquired a 2014 Newmar Bay Star. It has Dometic Ceiling ducted AC's. The return air is also ceiling ducted. Does it have a filter? Thanks in advance for any assistance,Ford QuestionsJust acquired a 2014 31' Newmar. How do I remove the hub caps on 19.5 tires? How does the "Tow Mode" function. Haven't got the books. Thanks in advance for assistance.norcold door panel removalI want to replace the door panels on my norcold 1200 refer. Tried search but no luck. Thanks in advance for your assistance. Don't want to break the snap trim.Re: Refeer Box TempWhat is a Danfoss?Secop compressor fridge? Need extra batteries and solar for boon docking? Thanks for the responses. It's holding 34 in the box. We are in San Diego now. Also; some mention was made of blockage. I was wondering if I were to use a rubber mallet and give the coils a few resounding whacks if that might get it's attention, or make it stop totally. Freezers stay at 2 degrees.Refeer Box TempI'm here in Yuma for a couple of days. Temp is 105. box temp is 47. I would immage the temp around the cooling unit is about 110 to 115. I currently have 5 muffin fans 3 at the top of the coils and the factory 2. I placed a 12" box fan at the opening. I realized I'm just forcing 105 degree air across the coils. My question after all of that is: is 47 about the best is can hope for? Thanks in advance for comments. MarvRe: Ford V 10 life expectancyThanks for the responses. I should have asked about the tranny. Is it an Allison?Ford V 10 life expectancyLooking at an exceptionally clean 08 with 80K miles. What miles could I expect the engine to last?Re: 8.1L Chevy Workhorse Engine IssuesCheck all of the hose clamps. mine were 1 to 2 turns loose.