sky_free wrote:
I did exactly as you are thinking and wired the 15A upfitter switch (3rd from the left) to the camera. Make sure to use a diode (60v, 5A) between the reverse activated power lead on the camera and the source for the reverse activated power so you don't backfeed the system when the switch is on.
My camera is a license plate camera so it's not as high as yours and it's offset to the left somewhat, but it works fine for me.
The upfitter switches I understand. Where is and what circuit is the "reverse activated power" wire to trigger the center display over-ride?
Thanks,
Joe
