Is there anything left on the market that allows the substitution of the OEM voltage regulator without throwing the ECU into Open Loop mode?This is sort of technical, excuse me.
I give UP. Two more post asking for help. But NO information on what they have.32 years working on RV units and I have never had this much trouble trying to help. I am leaving with the rest of the guys.
Hi,My class C has rear (manual) air bags. If I added air bags to the front and a pump with bleed mechanism might it be used for leveling the rv when it is standing still?
Hello all, I am new to RVs and I am here because I am having issues with my Damon Challenger coach. I am confident that my coach’s battery charger doubles as a converter for the TV and some other appliances. When the generator is off, the 12v does n...
This is probably an idiotic question, but I am thinking ahead to next year.I would like to buy a small generator, and am wondering if a Y adapter to go between 2 15A outlets on the gen and my 30A shore power cord exists? Thanks for any input.
My furnace will cycle normally for a few cycles and then will not operate when heat is called for. I have replaced the circuit boards in the furnace and the ceiling A/C unit, I have cleaned the sail switch, and replaced the limit switch and thermosta...
Last night a saw an ad on TV for Clear Flex. It showed someone using this product on their RV instead of caulk. Has anyone tried this and how did it work. Sure looks like it would easier than recaulking all the seams.
Can some one tell me how solar panels work? I have one in a class A that I bought used. Put a new battery in it and dont know how it works. Does a switch need turned on to make it work?
I am trying to figure out my wiring for my tail lights on my 1984 starcraft starmaster pop up. I have four wires coming out to the old taillights on the driver side. These are white which I know is ground, green which I know is for running lights, ye...
I put together a portable kit of 2 x 50w panels. They are 18.0v, and have junction boxes rather than the MC4 connectors. I'm not going to be using MC4's, either. I want to use 25' of wire. I want it to be flexible more or less like an extension c...
I'm installing the PD 4000 power center to replace an old Magnetek. The AC side looks straightforward I understand where I'm going to have to terminate everything. But the DC side I'm not quite understanding. I see where the two lines going to the...
Propane alarm was going off in our C when I went into the garage today. MH has been parked for last two weeks with everything turned off. Did have electric plugged into wall outlet. I unplugged the power cord from wall and plugged it back into the...
So coming home Saturday from a month at the base of wolf creek pass. About 150 miles from home it was starting to get slightly warm, decided to go ahead and try the genset with the front air conditioner. It fired right up, ran smooth. Turned on on...
