โJun-17-2017 10:30 AM
โJul-19-2020 07:55 PM
โJul-19-2020 09:25 AM
โJul-17-2020 08:17 PM
โJul-17-2020 08:12 PM
โJul-17-2020 08:10 PM
โJul-17-2020 08:08 PM
โJul-17-2020 08:05 PM
โJul-16-2020 08:26 PM
โJul-16-2020 08:19 PM
โJul-15-2020 08:38 PM
โJul-15-2020 08:34 PM
โJul-15-2020 08:31 PM
โJul-14-2020 04:58 PM
โJul-13-2020 07:19 AM
Larry202br wrote:fulltimin wrote:
Next up are the pieces of aluminum angle that I wanted to install on the corners of the 2 counters to secure everything together.
First thing I did was to remove some of the plywood on the corner of the wheel well. I took enough off, so the aluminum would be flush with the plywood, after installation.
Did you remove that wood with a chisel? Neat job!
โJul-13-2020 05:46 AM
fulltimin wrote:
Next up are the pieces of aluminum angle that I wanted to install on the corners of the 2 counters to secure everything together.
First thing I did was to remove some of the plywood on the corner of the wheel well. I took enough off, so the aluminum would be flush with the plywood, after installation.