I have hydraulic jacks to level my rig, they are on the floor next to the driver seat and I control each one With a lever They have worked fine however today I turned the switch on and the lights come on but I get no movement, the jacks don't move,no noise,nothing I checked the fuse and it's fine Where do I look next ? Thanks
Are the HWH jacks 200 series? If so I would look in the engine compartment it should be a black box right in front of the radiator. But I doubt that low fluid is causing this problem. If you go to their website they have a good troubleshooting guide there. That will get you started and you could post back what you find after going through the troubleshooting steps.
I checked the fuse next to the levers Where were the other fuse be or hydraulic fluid container I was once told by somebody that it might be transmission fluid and not hydraulic fluid is that possible