Adding 2nd a/c with in-command system

[mooky_stinks]

Wondering if anyone has experience with installing a 2nd bedroom a/c and what is needed to connect it to the in-command system. From what little info is out there, it looks like a "gateway" and a controller is required. I saw a write-up on the Keystone forum but the photos are no longer available. The in-command screen already shows the front a/c option and there is a temp sensor on the bedroom wall.

[mooky_stinks]

Thanks. I'll have to look into more doing it myself, as I've gotten a quote of around $2500 from the dealer. I was also wondering if it's possible to install a stand alone a/c with it's own thermostat?

[ford_truck_guy]

Correct, a "Gateway " and a " Controller" are needed from what the folks at ASA Electronics ( they make it ) .. You then reconfigure the "Floorplan" in the incommand settings