magnum energy board failure

[uncle_t]

my magnum energy board display has gone blank. all the components are working, i.e. the inverter, the charger , etc. it just does not display what is going on. any help appreciated

[uncle_t]

gary-

that did the trick. many thanks.

[GBaxter]

If it is just the display on the remote, unplug the remote from either the remote or at the inverter. Wait a minute and plug back in probably will fix the issue. The plug is a standard phone jack and usually easiest to access at the inverter in the bay. The remote cable will have a blue tag marked remote plugged into the blue labeled port.

Gary

[The_Texan]

There is a reset procedure that is directly based on your problem. Do a search on their website and if not there, call them Mon and they will give it to you.

Link to the Display info