Good Sam Community

RKW · ‎Jun-05-2020

There is an on/off switch located outside in the water heater(WH)bay. I understand this is to power the electric heating element should you choose to heat the water with 110v. If I want to heat with 110, should the inside switch for the WH be in the on or off position? I'm talking about the switch at the inside control panel. The model is SW6DE. Thanks.

Ryan

2015 Ford F250
2015 Rockwood Signature Ultralite 8280 WS
Dual Honda EU2000i Generators

The wages of sin are death; but after they're done taking out taxes, it's just a tired feeling.

RKW · ‎Jun-05-2020

corvettekent wrote:
Both the outside and inside switch need to be on to heat with electic.

Thanks for the response. When I turned on the inside switch, the gas burner lit.

Ryan

2015 Ford F250
2015 Rockwood Signature Ultralite 8280 WS
Dual Honda EU2000i Generators

The wages of sin are death; but after they're done taking out taxes, it's just a tired feeling.

corvettekent · ‎Jun-05-2020

Both the outside and inside switch need to be on to heat with electic.

2022 Silverado 3500 High Country CC/LB, SRW, L5P. B&W Companion Hitch with pucks. Hadley air horns.

2004 32' Carriage 5th wheel. 860 watts of solar MPPT, two SOK 206 ah LiFePO4 batteries. Samlex 2,000 watt Pure Sine Wave Inverter.

Good Sam Community

Suburban Water Heater electric heating element question