Hey guys, first post just recently started full timing in a 2004 KZ inc. New Vision 34’ 5th wheel. Everything worked great until last week, the a/c started short cycling and the LP leak detector started screaming and showing a fault. I replaced the t...
Hey guys, So I still haven't figured it out. I tightened some wire nuts and got the 12v supply to give 12v. However whenever I go to test at the wire nut junction on the furnace RED, T-RED, +BLUE and 12v+ wire nut it is reading 1.5v until i remove th...
I traced the power source for furnace to a wire nut union beneath the a drawer that is orange and white and coming out of the wall. It reads 2.5v, I cannot seem to find a orange and white set of wires on the fuse box anywhere so i am not sure where t...
Tried running the jumper still getting 1.8v from the red wire on furnace and a good ground. All of the fuses I’m seeing are good. I’ll try jumping the two blue wires and see if it starts.
For some reason the images are only opening on my posts if you open them in a new tab. Atleast from my end, I'm not sure if they are showing up for you guys.
