Search gave no hits. I have a Dometic 9100 Motorized awning. The motor has failed and is locked up. Because it's locked up, It won't allow me to manually retract it. The owners manual says to remove the two Allen head screws to free it. However, the ...
Our sliding glass entrance door got shattered. It's a Cedar Creek (Forest River) Cottage 40 CRS. I've reached out to FR three different ways only to be ignored. Where can I find a replacement? I'd love to replace the whole thing with a unit fromm Ho...
Towing our 5er to our newly purchased lot in Choestoe Falls RV community we broke down in Jasper, 41 miles short of our destination. Suspect trash in fuel lines. Thanks to Good Sam roadside assistance, we got the truck to a dealership after hours. Th...
My kitchen slide out has started "jumping gears" when nearly all the way in. The motor is still good. Can anybody help me find replacement parts, and how-to info? I believe the assembly was made by KZ Sportsmen, based on some pics and drawings posted...
Over the last couple of years, the cold water pressure at the kitchen sink has diminished. The problem is only at the kitchen faucet, and only the cold water. My first guess is that I have a clogged filter, but cannot locate one. It is on the unit in...
Dougrainer/fj12ryder........ Afraid not, (reminds me of the the joke with the punchline, 'a frayed knot'). The piece the set screws seat into does not spin on the shaft. That piece is fast to the motor shaft, and the motor shaft will not turn. Once ...
Yes, the set screws release the motor, but the wires from the motor, even when retracted and tucked in, impede the rotation of the spool enough to prevent it from rotating. Should I just get some additional manpower and force it?? Should the motor...
Thanks gdweb, but that's not the problem. It's getting power, but the motor is seized up. I'm trying to figure how to make it retract with a seized motor. I'm so not a fan of the engineering, not to mention the lack of available, practical informati...
Thank y'all for the replies. The manufacturer will only sell the whole door unit for over $1,000 shipped. Residential doors are taller than these. It might fit, but I wasn't willing to chance being able to trim 2" off the header. Turns out, a local g...
Profound apologies for not following up with y'all. I appreciated all your responses. As it turned out, the truck wouldn't be fixed 'till Friday. I reached two different guys who'd tow me for at least double what it should have cost. I was ready to b...
